Mechanical Limiter Plate / Limiter Plate for Mopar Ignition Distributor + Centrifugal Spring Kit

Description

Mopar Ignition Distributor Limiter Plate for Centrifugal Advance with Spring Kit

The most common issue with original Mopar ignition distributors is excessive mechanical ignition advance.
To achieve optimal starting behavior and improved performance, at least 10 degrees before TDC should be set at idle. Without a limiter, however, knocking occurs at higher RPMs.

This reversible solution eliminates this problem!

Simply select the desired slot and place it on the centrifugal advance weights – done. Example: With the 22-degree slot, you can set 14 degrees at idle and achieve a total advance of 36 degrees.